Top Curve
Symbol
PSS1 Back View PSS1 Front View PSS1
Pertronic Industries' PSS1 is a 100V Line Speaker (1.1W max) and line transformer mounted in a PDL plastic aesthetically pleasing acoustic enclosure. When used in conjunction with the Pertronic 20W and 50W 100V line Amplifiers it provides a cost effective solution for speaker based building evacuation systems that must comply with the NZS4512:2003 and AS 2220 standards.

PSS5 PSS5
Pertronic Industries' PSS5 100V 5W Ceiling Speaker is a 4” (100mm) quick-fit speaker with transformer power tappings for 0.33W, 0.66W, 1.25W, 2.5W and 5W and a DC blocking capacitor. Spring loaded clamps allow the speaker to be installed into a 152mm aperture without the use of any fixings. A frequency response of 110Hz to 13kHz provides superior intelligibility when used with good quality amplifiers.

PSS5-LP PSS5-LP
The PSS5 100V 5W Low Profile Ceiling Speaker is a 4 (100mm) quick-fit speaker with transformer power tappings for 0.33W, 0.66W, 1.25W, 2.5W and 5W and a DC blocking capacitor. Spring loaded clamps allow the speaker to be installed into a 152mm aperture without the use of any fixings. A frequency response of 110Hz to 13kHz provides superior intelligibility when used with good quality amplifiers.

PSS5-LPSME PSS5-SME
The PSS5-LPSME Surface Mount Enclosure allows the PSS5-LP Ceiling Speaker to be mounted when surface wiring is used. The PSS5-LP spring clamps makes for quick and easy fitting to the PSS5-LPSME surface mount enclosure. Please note the PSS5 Standard Ceiling Speaker cannot be used with the PSS5-LPSME surface mount enclosure.

PSS3 PSS3
Pertronic Industries' PSS3 100V 3W Ceiling Speaker is a 3.5” (88mm) quick-fit speaker with transformer power tappings for 0.33W, 0.66W, 1.25W and 3W and a DC blocking capacitor. Spring loaded clamps allow the speaker to be installed into a 108mm aperture without the use of any fixings. A frequency response of 100Hz to 16kHz provides superior intelligibility when used with good quality amplifiers.

PSS3-LP PSS3-LP
Pertronic Industries' PSS3 100V 3W Ceiling Speaker is a 3.5” (88mm) quick-fit speaker with transformer power tappings for 0.33W, 0.66W, 1.25W and 3W and a DC blocking capacitor. Spring loaded clamps allow the speaker to be installed into a 108mm aperture without the use of any fixings. A frequency response of 100Hz to 16kHz provides superior intelligibility when used with good quality amplifiers.

PSS5-LPSME PSS3-SME
The PSS5-LPSME Surface Mount Enclosure allows the PSS3-LP Ceiling Speaker to be mounted when surface wiring is used. The PSS3-LP spring clamps makes for quick and easy fitting to the PSS3-LPSME surface mount enclosure. Please note the PSS3 Standard Ceiling Speaker cannot be used with the PSS3-LPSME surface mount enclosure.

PSSHORN PSSHORN
The PSSHORN is a 100V 3W horn loudspeaker with transformer power tappings for 1W, and 3W and a DC blocking capacitor. It is an ideal choice for indoor, industrial and commercial applications such as hotels, schools, offices, hospitals and factories.

BCS-HS10E

The BCS-HS10E is a 100V 10W Horn loudspeaker with transformer power tappings for 1.25W, 2.5W, 5W, 7.5W, and 10W and a DC blocking capacitor. Made from tough UV stabilised ABS and finished in a natural light grey, the horn speaker is water and dust protected and certified to IP66


C2048
The C2048 is a 100V 10W IP66 rated weatherproof horn loudspeaker with transformer power tappings for 1.25W, 2.5W, 5W, 7.5W, and 10W and a DC blocking capacitor. Designed for indoor or outdoor installations, this speaker features marine grade stainless steel fixings & mounting bracket. Recommended for use in marine environments; ships, industrial plants and other harsh environmental applications.

MPH-5300 MPH-5300
The' MPH-5300 is a 100V 30W Horn Speaker, rated IP66 with adjustable power tappings of 30W, 15W, 7.5W and 107dB sensitivity (1W/1M). Temperature range -30C to +55C.

PS2
Pertronic Industries' PS2 Sounder generates the Evacuation and Alert Tones as specified by AS 2220. The PS2 can also be used to generate an alert signal compliant with NZS 4512:1997
Listen to the AS 2220 Evac Tone
Listen to the AS 2220 Alert Tone

PS1
Pertronic Industries' PS1 Sounder generates the Evacuation and Alert Tones as specified by AS 2220. The PS1 can also be used to generate an alert signal compliant with NZS 4512:1997
Listen to the AS 2220 Evac Tone
Listen to the AS 2220 Alert Tone

PS1400
Pertronic Industries' PS1400 Sounder is a modified PS1 Sounder and generates tones equivalent to the System Sensor PA400 sounder. The PS1400 is not AS2220 compliant.

PLS
Pertronic Industries' PLS is a Sounder and LED unit, that provides both an audible and visual warning The PLS light output is generated from a matrix of 6 RED LED emitters to give an output of 30 mcd Max. It also has a maximum sound level of 98dBA.
Listen to the AS 2220 Evac Tone
Listen to the AS 2220 Alert Tone

PSSB501
Pertronic Industries' PSSB501 is a 100V Line Speaker (1.1W max) and line transformer mounted in a purpose-moulded plastic aesthetically pleasing acoustic enclosure. When used in conjunction with the Pertronic 20W and 50W 100V line Amplifiers it provides a cost effective solution for speaker based building evacuation systems that must comply with the NZS 4512:2003 and AS 2220 standards.

PSSB401
Pertronic Industries' PSSB401 is a 100V Line Speaker (1.1W max) and line transformer mounted in an aesthetically pleasing acoustic enclosure. The enclosure is designed to support a System Sensor B401 Conventional base and detector. When used in conjunction with the Pertronic 20W and 50W 100V line amplifiers it provides a cost effective solution for speaker based building evacuation systems that must comply with the NZS 4512:2003 and AS 2220 standards.

PSSB524IEFT
Pertronic Industries' PSSB524IEFT is one of a range of 100V-Line speakers (1.1W max). Integrates a short-circuit isolator with a 1W speaker; tapped line transformer and DC blocking capacitor mounted in an aesthetically pleasing acoustic enclosure, designed to support a System Sensor B524IEFT Analogue Addressable base and detector.

PSBAS2220
Pertronic Industries' PSB Sounder Base generates the evacuation tone as specified by AS 2220. The PSB can also be used to generate an alert signal acceptable to NZS 4512:1997
Listen to the AS 2220 Evac Tone
Listen to the AS 2220 Alert Tone

PA400R, PA400W (discontinuted - see PS1400 above as alternative)
PA400 Series Mini-Alert Sounders operate at 24 volts and are ideal for hotel, motel or residential fire system applications, where a smaller notification device is desired. The PA400 sounders are available with or without FIRE identification and are offered in red and white.

SSM24-6 (24v 6in), SSM12-6 (12v,6in)
SSM Series Bells are low current, high decibel notification appliances for use in fire and burglary systems or other signaling applications.

SONF1DC24R (Indent product)
The sonF1DC24R is a IP55 continuously rated compact sounder, ideal for fire, security applications.

A105N-IS (Indent product)
The A105N-IS is an IP66 ATEX certified Intrinsically  Safe Sounder which produces a loud (105dB(A) @ 1 metre) warning signal in a hazardous area.
Bottom Curve