Fire Alarm Control Panels
F4AUXRLYV2 Relay Board
Provides additional (auxiliary) fire and fault (defect) relays for an F4 conventional fire alarm control panel
Networking
Net2LayoutTool
A free software tool that automatically creates a data table representing the layout of an F220/Net2 network
SysLogCopier
Copies Linux OS diagnostic logs from F220 or Net2 card to USB stick. This tool is also available in Pertronic FireUtils® v7.00 (or later)
Software Applications
FireUtils v8.00.01.53
Free Windows-compatible programming and diagnostic application for F220/Net2 systems. Also supports F120A
F100A Utilities v5.14.04
F100A fire system programming and diagnostic application for F100A version 5.xx.xx
Network Utilities v2.14.08
Network system programming and diagnostic application for the Pertronic Network
F100A Utilities v3.24.4
F100A fire system programming and diagnostic application for F100A v3.xx.xx - v4.58
F100A Utilities v2.14
F100A fire system programming and diagnostic application for F100A v1.65 - v2.xx.xx. (Prior to introduction of Boolean cause-effect logic)
F100A TMS Utilities v2.1
F100A TMS fire system programming and diagnostic application for all F100A TMS versions
FAAST FLEX Aspire v3.10
Windows® app. for designing and specifying FAAST FLEX ASD systems including pipe network configuration. NOTE: Does not support VESDA systems
VESDA VSC v3.12
Management application for Xtralis fire and gas detection systems including VESDA and ICAM smoke and gas detectors and ancillary devices
VESDA Aspire Software v3.12
A Windows®-based application for designing and specifying VESDA aspirating smoke detection systems
FAAST LT PipeIQ v3.0.0
A Windows®-based application for designing and specifying FAAST aspirating smoke detection systems
Extinguishing Agent Release Systems
Equipment Cabinets
Mimics, Repeaters & Interfaces
SPIB-SGDAP Interface
Signal Generating Device (Advanced Protocol) for interfacing F100A, F220, and F120A fire panels with fire brigade alarm transmitters
F100A LCD Mini Mimics
LCD mini-mimic remote display for Pertronic F100A & F120A analogue addressable fire alarm control panels
L485 LED Address Controller
Controller for driving multiple LEDs, relays, or open collector outputs from a Pertronic fire alarm control panel's RS-485 bus
F4-RMAX Module
Interface for connecting a remote LED mimic to an F4 fire alarm control panel. With auxiliary fire and auxiliary fault (defect) relays
LP Display Board
Light-Pipe LED Displays for F220, F120, F100, F16e and F4-RMAX
SGD7 Signal Gen
Digital Signal Generating Device for interfacing a fire alarm system with a fire brigade alarm transmitter
SGD8MD Multidrop
Two-Wire Multidrop Digital Signal Generating Device for interfacing a fire alarm system with a fire brigade alarm transmitter
F100AMME Escutcheon
Escutcheon plate for flush-mounting the Pertronic LCD Mini-Mimic
Transmitters
SPIB-SGDAP Interface
Signal Generating Device (Advanced Protocol) for interfacing F100A, F220, and F120A fire panels with fire brigade alarm transmitters
SGD7 Signal Gen
Digital Signal Generating Device for interfacing a fire alarm system with a fire brigade alarm transmitter
SGD8MD Multidrop
Two-Wire Multidrop Digital Signal Generating Device for interfacing a fire alarm system with a fire brigade alarm transmitter
Accessories
F120TOF220 Upgrade KIT
Kit for upgrading an F120A system to an F220, including masterboard, keyboard+display, and brackets (excludes outer door)
CPTSTPRWP Weatherproof
A tough, transparent, weatherproof polycarbonate shield and frame that fits over a manual call point
CPTST series
A tough, transparent, polycarbonate shield and frame that fits over a manual call point. Fitted with warning sounder
SPIB-SGDAP Interface
Signal Generating Device (Advanced Protocol) for interfacing F100A, F220, and F120A fire panels with fire brigade alarm transmitters
CPTSTPRHTR Call Point Stopper
A tough, transparent, polycarbonate shield and frame that fits over a manual call point, with built-in 230 Vac heater
F4AUXRLYV2 Relay Board
Provides additional (auxiliary) fire and fault (defect) relays for an F4 conventional fire alarm control panel
CPPFPL Mounting Plate
Fascia panel for flush-mounting Pertronic Manual Call Points in place of large old manual call points (break-glass alarms)
SBB Mounting Box
Surface-mounting back boxes for L Series alarm (alerting) devices. Available in wall-mount and ceiling-mount variants.
KACSGW MCP Window
Replacement windows for Manual Call Points, including Snapglaze and Break-Glass types
F4-RMAX Module
Interface for connecting a remote LED mimic to an F4 fire alarm control panel. With auxiliary fire and auxiliary fault (defect) relays
EXTSPKRHOUS Speaker Housing
Vandal-resistant enclosure for horn speakers. Power-coated zintec.
RLY24V Relay
Auxiliary relay board with two form C (changeover) contacts rated 4 Amps, 30 Vdc (resistive). 24 Volt (nominal) coil
CP500 Programmer
Handheld Programmer for Analogue Addressable Weatherproof Detectors
F100ZIPB Opto-Isolated IP Board
Eight-way opto-isolated input board for the Pertronic analogue addressable loop responder and multi-function loop responder
S300RPTU Programming Unit
300 Series - Remote Hand Held Programming Unit
ASD-F-SEN-SSE Sensor Head
Replacement smoke sensor for FAAST LT-200 series aspirating smoke detectors
CLC-MON-N9P Cable
Flexible RS-232 extension lead with DB9 male and DB9 female connectors and straight-through connection
Fire Door Holders
Floor-mount or wall-mount electromagnetic door holders for fire doors
FDHWM38-24V Door Holder
Wall-mount electromagnetic door holder for fire doors
FDHWM65-24V Door Holder
Wall-mount electromagnetic door holder for fire doors
MOXA-TCF-142 Series
MOXA serial to fire-optic converters for RS-232 and RS-485 circuits. Transmit up to 40 km over single-mode fibre-optic cable
CCCI Interface
It's suitable for use with the F16e, F16, F4, or F1 panels, or with Loop
Responders on analogue addressable systems.
Tools and Test Equipment
OSP-002 OSID Laser Tool
This tool clips into the eyeball on OSI/OSID beam smoke detectors. It produces a red laser beam showing the detector beam's target
CP500 Programmer
Handheld Programmer for Analogue Addressable Weatherproof Detectors
Sensitivity Reader
This tool is to measure the sensitivity of System Sensor model 2151BPI conventional photo-electronic smoke detectors.
S300RPTU Programming Unit
300 Series - Remote Hand Held Programming Unit
