Analogue Addressable Detectors
2251CPI Detector
C Series analogue addressable photoelectric smoke detector with programmable alarm threshold.
2251TMBPI Detector
"Acclimate" multi-criteria detector with photoelectric smoke sensor and 63 °C fixed (static) temperature thermistor heat sensor
5251CPI Detector
C Series Intelligent addressable heat detector with programmable "fixed" temperature threshold.
5251RCPI Detector
C Series analogue addressable "rate of rise" heat detector with programmable temperature threshold.
5251B-WP Detector
Weatherproof analogue addressable heat detector with 57 °C fixed (static) temperature threshold, including special base
5251RB-WP Detector
Weatherproof AA rate of temperature rise heat detector with 57 °C fixed (static) temperature threshold, including special base
7251CPI Detector
C Series intelligent addressable plug-in Pinnacle™ high-sensitivity photoelectric smoke detector. Configurable alarm threshold.
2251BPI Detector
Photoelectric analogue addressable plug-in smoke detector
5251BPI Detector
Analogue addressable heat detector with 57 °C fixed (static) temperature threshold
5251RBPI Detector
Analogue addressable rate of temperature rise heat detector with 57 °C fixed (static) temperature threshold
Analogue Addressable Beam Detectors
BEAMLRK Reflector
Long Range Reflector (70 - 100 m).
Used with 6500SE-34 & 6500RSE
RTS151KIT Remote Test Station
Remote indicator and test panel with key-switch enabled test mode for duct and beam detectors
BEAMHKR Heater Kit
Heater Kit (Indent only, used with 6500SE-34 & 6500RSE)
BEAMHK Heater Kit
Heater Kit (Indent only, used with 6500SE-34 & 6500RSE)
Analogue Addressable Duct Detectors
DNRW Duct Housing
Analogue addressable watertight non-relay photoelectric duct smoke detector
RTS151KIT Remote Test Station
Remote indicator and test panel with key-switch enabled test mode for duct and beam detectors
Conventional Detectors
2151BPI Detector
Conventional photoelectric smoke detector. Available in white and ivory
Thermistor Heat Detector
Conventional thermistor indicating heat detectors. Fixed alarm threshold: 57 °C (blue) or 77 °C (yellow). NZS 4512-approved
Thermistor Heat Detector w Remote
Conv. thermistor indicating heat detectors Terminals for remote indicator Alarm threshold: 57 °C (blue), 77 °C (yellow) NZS 4512-approved
Thermistor Heat Det. Weatherproof
Conventional thermistor indicating heat detectors. Weatherproof. Fixed alarm threshold: 57 °C (blue), 77 °C (yellow). NZS 4512-approved
Thermistor Heat Det. Alk. Resistant
Conv. thermistor indicating heat detectors. Alkaline wash resistant. Fixed alarm threshold: 57 °C (blue) or 77 °C (yellow) NZS 4512-approved
THD for Freezers
Conventional thermistor indicating heat detector. Fixed alarm threshold: 57 °C NZS 4512 type (blue) Suitable for freezers and cool stores
IHD Kit
Conventional bi-metallic indicating heat detectors with remote sensor. Fixed threshold: 57 °C (blue) or 125 °C (black). NZS 4512-compliant
2351TEM Detector
Conventional multi-criteria detector. Photoelectric smoke, configurable as low, medium, or high sensitivity. 58 °C rate of rise heat sensor
4351E Detector
Conventional heat detector with 78 °C fixed alarm temperature threshold
5351E Detector
Conventional rate of rise heat detector with 58 °C fixed alarm temperature threshold
5351TE Detector
Conventional heat detector with 58 °C fixed alarm temperature threshold
IHD*-V
Conventional indicating heat detectors. Fixed alarm threshold: 57 °C (blue) or 77 °C (yellow). NZS 4512-compliant
IHD*E-V
Conventional indicating heat detectors. Encapsulated. Fixed alarm threshold: 57 °C (blue) or 77 °C (yellow). NZS 4512-compliant
IHD*R-V
Conv. indicating heat detectors. Terminals for remote indicator. Fixed alarm threshold: 57 °C (blue), 77 °C (yellow). NZS 4512-compliant
IHD*EAR-V
Conv. indicating heat detectors. Alkaline wash resistant. Fixed alarm threshold: 57 °C (blue), 77 °C (yellow). NZS 4512-compliant
HD*-V
Conv. non-indicating heat detectors, with or without encapsulation. Fixed alarm threshold: 57 °C (blue), 77 °C (yellow). NZS 4512:1997-compl
2W-B Detector
2-wire conventional photoelectric smoke detector
2WTA-B Detector
Multi-criteria detector, 2-wire, with photoelectric smoke sensor, heat sensor with 58 °C fixed alarm threshold and alarm sounder
4W-B Detector
4-wire conventional photoelectric smoke detector
4WT-B Detector
Multi-criteria detector, 4-wire, with photoelectric smoke sensor and heat sensor with 58 °C fixed alarm threshold
4WTR-B Detector
Multi-criteria detector, 4-wire, with photoelectric smoke sensor, heat sensor with 58 °C fixed alarm threshold and relay
4WTAR-B Detector
Multi-criteria detector, 4-wire, with photoelectric smoke sensor, heat sensor with 58 °C fixed alarm threshold, sounder, and relay
2012/24AUSI Detector
Photoelectric Smoke Alarm 4-wire, 12 V / 24 V with 9 V battery AS 3786:2014
PC614 Detector
Conventional carbon monoxide (CO) and rate-of-temperature-rise heat detector. Suitable for detecting slow-smoldering and fast-flaming fires.
Sensitivity Reader
This tool is to measure the sensitivity of System Sensor model 2151BPI conventional photo-electronic smoke detectors.
Conventional Beam Detectors
FRONE Beam Detector
Standalone beam detector with an ease of installation
OSID
Pulsed dual-wavelength smoke detector for open areas
BEAMLRK Reflector
Long Range Reflector (70 - 100 m).
Used with 6500SE-34 & 6500RSE
RTS151KIT Remote Test Station
Remote indicator and test panel with key-switch enabled test mode for duct and beam detectors
BEAMHKR Heater Kit
Heater Kit (Indent only, used with 6500SE-34 & 6500RSE)
BEAMHK Heater Kit
Heater Kit (Indent only, used with 6500SE-34 & 6500RSE)
OSP-002 OSID Laser Tool
This tool clips into the eyeball on OSI/OSID beam smoke detectors. It produces a red laser beam showing the detector beam's target
Conventional Duct Detectors
D2-AUS Duct Housing
Conventional duct housing with 2151 detector, no relay, no tube
D4120 Duct Detector
4-Wire Photoelectric + Relay Duct Smoke Detector (stand-alone only)
D4120W Weatherproof Duct Detector
Waterproof 4-Wire Photoelectric Duct Smoke Detector. Fitted with auxiliary relay with two form C (change-over) contacts.
RTS151KIT Remote Test Station
Remote indicator and test panel with key-switch enabled test mode for duct and beam detectors
Flame Detectors
Linear Heat Detection
LHD
Linear heat detection cable. Please note that Pertronic-Anbesec LHD Cable is preferred for new installations
