Detectors
2151BPI Detector
Conventional photoelectric smoke detector. Available in white and ivory
D2-AUS Duct Housing
Conventional duct housing with 2151 detector, no relay, no tube
2251CPI Detector
C Series analogue addressable photoelectric smoke detector with programmable alarm threshold.
Thermistor Heat Detector
Conventional thermistor indicating heat detectors. Fixed alarm threshold: 57 °C (blue) or 77 °C (yellow). NZS 4512-approved
2251TMBPI Detector
"Acclimate" multi-criteria detector with photoelectric smoke sensor and 63 °C fixed (static) temperature thermistor heat sensor
OSID
Pulsed dual-wavelength smoke detector for open areas
DNRW Duct Housing
Analogue addressable watertight non-relay photoelectric duct smoke detector
D4120 Duct Detector
4-Wire Photoelectric + Relay Duct Smoke Detector (stand-alone only)
Thermistor Heat Detector w Remote
Conv. thermistor indicating heat detectors Terminals for remote indicator Alarm threshold: 57 °C (blue), 77 °C (yellow) NZS 4512-approved
D4120W Weatherproof Duct Detector
Waterproof 4-Wire Photoelectric Duct Smoke Detector. Fitted with auxiliary relay with two form C (change-over) contacts.
Thermistor Heat Det. Weatherproof
Conventional thermistor indicating heat detectors. Weatherproof. Fixed alarm threshold: 57 °C (blue), 77 °C (yellow). NZS 4512-approved
BEAMLRK Reflector
Long Range Reflector (70 - 100 m).
Used with 6500SE-34 & 6500RSE
5251CPI Detector
C Series Intelligent addressable heat detector with programmable "fixed" temperature threshold.
RTS151KIT Remote Test Station
Remote indicator and test panel with key-switch enabled test mode for duct and beam detectors
Thermistor Heat Det. Alk. Resistant
Conv. thermistor indicating heat detectors. Alkaline wash resistant. Fixed alarm threshold: 57 °C (blue) or 77 °C (yellow) NZS 4512-approved
5251RCPI Detector
C Series analogue addressable "rate of rise" heat detector with programmable temperature threshold.
5251B-WP Detector
Weatherproof analogue addressable heat detector with 57 °C fixed (static) temperature threshold, including special base
THD for Freezers
Conventional thermistor indicating heat detector. Fixed alarm threshold: 57 °C NZS 4512 type (blue) Suitable for freezers and cool stores
5251RB-WP Detector
Weatherproof AA rate of temperature rise heat detector with 57 °C fixed (static) temperature threshold, including special base
BEAMHKR Heater Kit
Heater Kit (Indent only, used with 6500SE-34 & 6500RSE)
IHD Kit
Conventional bi-metallic indicating heat detectors with remote sensor. Fixed threshold: 57 °C (blue) or 125 °C (black). NZS 4512-compliant
BEAMHK Heater Kit
Heater Kit (Indent only, used with 6500SE-34 & 6500RSE)
7251CPI Detector
C Series intelligent addressable plug-in Pinnacle™ high-sensitivity photoelectric smoke detector. Configurable alarm threshold.
2351TEM Detector
Conventional multi-criteria detector. Photoelectric smoke, configurable as low, medium, or high sensitivity. 58 °C rate of rise heat sensor
2251BPI Detector
Photoelectric analogue addressable plug-in smoke detector
4351E Detector
Conventional heat detector with 78 °C fixed alarm temperature threshold
5251BPI Detector
Analogue addressable heat detector with 57 °C fixed (static) temperature threshold
5351E Detector
Conventional rate of rise heat detector with 58 °C fixed alarm temperature threshold
5251RBPI Detector
Analogue addressable rate of temperature rise heat detector with 57 °C fixed (static) temperature threshold
5351TE Detector
Conventional heat detector with 58 °C fixed alarm temperature threshold
IHD*-V
Conventional indicating heat detectors. Fixed alarm threshold: 57 °C (blue) or 77 °C (yellow). NZS 4512-compliant
IHD*E-V
Conventional indicating heat detectors. Encapsulated. Fixed alarm threshold: 57 °C (blue) or 77 °C (yellow). NZS 4512-compliant
IHD*R-V
Conv. indicating heat detectors. Terminals for remote indicator. Fixed alarm threshold: 57 °C (blue), 77 °C (yellow). NZS 4512-compliant
IHD*EAR-V
Conv. indicating heat detectors. Alkaline wash resistant. Fixed alarm threshold: 57 °C (blue), 77 °C (yellow). NZS 4512-compliant
HD*-V
Conv. non-indicating heat detectors, with or without encapsulation. Fixed alarm threshold: 57 °C (blue), 77 °C (yellow). NZS 4512:1997-compl
2W-B Detector
2-wire conventional photoelectric smoke detector
2WTA-B Detector
Multi-criteria detector, 2-wire, with photoelectric smoke sensor, heat sensor with 58 °C fixed alarm threshold and alarm sounder
4W-B Detector
4-wire conventional photoelectric smoke detector
4WT-B Detector
Multi-criteria detector, 4-wire, with photoelectric smoke sensor and heat sensor with 58 °C fixed alarm threshold
4WTR-B Detector
Multi-criteria detector, 4-wire, with photoelectric smoke sensor, heat sensor with 58 °C fixed alarm threshold and relay
4WTAR-B Detector
Multi-criteria detector, 4-wire, with photoelectric smoke sensor, heat sensor with 58 °C fixed alarm threshold, sounder, and relay
2012/24AUSI Detector
Photoelectric Smoke Alarm 4-wire, 12 V / 24 V with 9 V battery AS 3786:2014
PC614 Detector
Conventional carbon monoxide (CO) and rate-of-temperature-rise heat detector. Suitable for detecting slow-smoldering and fast-flaming fires.
LHD
Linear heat detection cable. Please note that Pertronic-Anbesec LHD Cable is preferred for new installations
Bases
B401 Detector Base
Mounting base for conventional plug-in System Sensor detectors. Available in white and ivory
B501AUS Detector Base
Plug-in base for analogue addressable detectors. Standard depth for 200 series detectors.
B501AP Base
Plug-in base for analogue addressable detectors and loop-powered devices. Extra depth to suit alarm devices such as addressable strobes.
B524RTE Detector Base
Plug-in base with change-over relay for analogue addressable detectors
WB-1AP Base Enclosure
Base Enclosure for Humid Environments, for use with Base Models: B501AP, B501, B401, B401R
Manual Call Points
AAMCPT Manual Call Point
Analogue Addressable Manual Call Point - Testable
CPPIN-3T MCP
Conventional indicating manual call point, flush mount, excluding back box
AAMCP-TWP-MK2 Manual Call Point
Analogue Addressable Weatherproof Manual Call Point - Testable
CPPIN-3TWP-MK2 MCP
Weatherproof conventional manual call point
AAMCPT-E Manual Call Point
Analogue Addressable MCP in Euro Style Enclosure
CPP MCP
Conventional manual call point with rocker switch. Available in red, yellow, and white
CPTSTPRWP Weatherproof
A tough, transparent, weatherproof polycarbonate shield and frame that fits over a manual call point
CPTST series
A tough, transparent, polycarbonate shield and frame that fits over a manual call point. Fitted with warning sounder
CPTSTPRHTR Call Point Stopper
A tough, transparent, polycarbonate shield and frame that fits over a manual call point, with built-in 230 Vac heater
CPP-DPDT MCP
Double-Pole double-throw non-engraved manual call point. Available in red and white
PS200 FLAP
Transparent hinged plastic cover for Euro Style manual call points, to reduce false alarms caused by accidental MCP activation
CPPFPL Mounting Plate
Fascia panel for flush-mounting Pertronic Manual Call Points in place of large old manual call points (break-glass alarms)
Modules
AM
Apartment module for NZS 4512 Type 5 analogue addressable fire alarm systems
M500DMR Module
Analogue Addressable Dual Input + Dual Relay Output Module
M210EA-CZR Module
IA conventional zone interface. Connects a zone of conventional smoke detectors to an IA system. Built-in isolator for the IA loop
M201EA-240 Module
Intelligent addressable control module with one 2-pole output relay (1 pole NO, 1 pole NC). Built-in loop isolator
M201EA Module
Analogue addressable control module with one output channel. Built-in isolator for the AA loop
M210EA Module
Intelligent addressable (IA) monitor module with one input channel. Built-in isolator for the IA loop
M220EA Module
Analogue addressable monitor module with two input channels. Built-in isolator for the AA loop
M221EA Module
Analogue addressable control & monitor module with two input channels and one output channel. Built-in isolator for the AA loop
CR-6 Module
Analogue addressable control module with six voltage-free form-C (change-over) relay contacts
IM-10 Module
Analogue addressable monitoring module with ten individually addressable inputs for normally-open contact devices
SC-6 Module
Analogue addressable control module with six supervised relay circuits for switching AC, DC, or audio
F100ZIPB Opto-Isolated IP Board
Eight-way opto-isolated input board for the Pertronic analogue addressable loop responder and multi-function loop responder
Aspirating Smoke Detection
VESDA-E VES-A10-P
Four-inlet aspirating smoke detector with individually-addressable inlet pipes and LCD display
VESDA-E VES-A00-P
Four-inlet aspirating smoke detector with individually-addressable inlet pipes and LED display
VESDA-E VEP-A00-1P
VESDA-E VEP with LEDs, 1 pipe
VESDA-E VEU-A10
VESDA-E VEU with 3.5" Display
VESDA VLF-500
VESDA Laser Focus Detector
VESDA VLF-250
VESDA Laser Focus Detector
VESDA VLI
VESDA VLI Series Detector
FAAST FLEX Aspire v3.10
Windows® app. for designing and specifying FAAST FLEX ASD systems including pipe network configuration. NOTE: Does not support VESDA systems
VESDA VSC v3.12
Management application for Xtralis fire and gas detection systems including VESDA and ICAM smoke and gas detectors and ancillary devices
VESDA Aspire Software v3.12
A Windows®-based application for designing and specifying VESDA aspirating smoke detection systems
FAAST LT-200 Analogue Addressable
Analogue Addressable Aspirating Smoke Detector
FAAST LT-200 Conventional
Stand-Alone Aspirating Smoke Detector
FAAST LT PipeIQ v3.0.0
A Windows®-based application for designing and specifying FAAST aspirating smoke detection systems
VSP-860 Kit
A funnel-shaped sampling nozzle and a kit of parts for installing the nozzle inside a cold storage facility.
ASD-F-SEN-SSE Sensor Head
Replacement smoke sensor for FAAST LT-200 series aspirating smoke detectors
ASD-FAAST-FILTER30M Filter
30 Micron Filter for FAAST XT, XM & XS Series aspirating smoke detectors.
ASD-FAAST-FILTERLT-2 Filter
Replacement filter for FAAST LT-200 aspirating smoke detectors. Two-Pack
CLC-MON-N9P Cable
Flexible RS-232 extension lead with DB9 male and DB9 female connectors and straight-through connection
Explosive Atmosphere Detection
22051EISE Detector
Intrinsically-safe analogue addressable plug-in photoelectric smoke detector
IST200E Module
Interface module for connecting Y72221 galvanic isolator & 22051EISE detectors to a Pertronic analogue addressable loop circuit
KFD0-CS-EX-1.51P Galvanic Isolator
Single channel galvanic isolator for use with conventional MCPs, fire and smoke detectors located in hazardous areas
Y72221-L4 Galvanic Isolator
Galvanic isolator for analogue addressable IS detectors. Pepperl & Fuchs type KFD0-CS-Ex1.54-Y2
PS200 FLAP
Transparent hinged plastic cover for Euro Style manual call points, to reduce false alarms caused by accidental MCP activation
MCP3A
Intrinsically safe conventional manual call point with back-box. Suitable for surface or flush mounting
WCP3A
Intrinsically safe IP67 weatherproof conventional manual call point with back-box for surface mounting
